BHQNW - PR-812, PART B
- MSDS: BHQNW
- Manufacturer: PRODUCTS RESEARCH AND CHEMICAL CORP
- Product Name: PR-812, PART B
- National Stock Number: 8030-01-033-3485
Product Identification
Product ID:PR-812, PART B
MSDS Date:06/06/1988
FSC:8030
NIIN:01-033-3485
Kit Part:Y
MSDS Number: BHQNW
Responsible Party
GLENDALE, CA 91209
US
Emergency Phone: 800-228-5635
Info Phone: 818-240-2060
Preparer: A.F.S.
Cage: DO563
Contractor
Telephone: 818-240-2060
Cage: DO563
Ingredients
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 15%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYL ISOBUTYL KETONE (SARA III)
CAS: 108-10-1
RTECS: SA9275000
Fraction By Weight: 15%
OSHA PEL 100 PPM/75 STEL
ACGIH TLV: 50 PPM/75 STEL; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
EPOXY RESIN
CAS: 25068-38-6
RTECS: KC2100000
Fraction By Weight: <5%
VOC. ORGANIC CMPD 347.6 G/L (MIXED)
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:LIQUID MAY DAMAGE EYE TISSUE. MAY
CAUSE ALLERGIC SKIN RASH IN SENSITIZED INDIVIDUALS. EXCESSIVE
INHALATION CAUSES HEADACHE, NAUSEA, VOMITING, AND POSSIBLE
DAMAGE TO PERIPHERAL NERVOUS SYSTEM.
Effects of Overexposure:EYE: SEVERE IRRITATION. LIQUID MAY DAMAGE EYE
TISSUE; INGST: NONE KNOWN SKIN: LOCAL IRRITATION. MAY CAUSE
ALLERGIC SKIN RASH IN SENSITIZED INDIVIDUALS. INHAL: NOSE/THROAT
IRRITATION. EXCESSIVE INHALATION CAUSES HEADACHE, NAUSEA,VOMITING,
AND POSSIBLE DAMAGE TO PERIPHERAL NERVOUS SYSTEM.
Medical Cond Aggravated by Exposure:MAY CAUSE ALLERGIC SKIN RASH IN
SENSITIZED INDIVIDUALS.
First Aid
First Aid:EYE: FLUSH W/LUKE WARM WATER FOR 15 MINS, CONSULT A PHYSICIAN
SKIN: WASH WITH SOAP & WATER, IF SYMPTOMS PERSIST
CONSULT A PHYSICIAN INHAL: REMOVE TO FRESH AIR, IF
SYMPTOMS ARE PRESENT CONSULT A PHYSICIAN
Fire Fighting
Flash Point Method:PMCC
Flash Point:30F/-1C
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER
Fire Fighting Procedures:USE AIR SUPPLIED RESPIRATOR. USE WATER TO COOL
HEAT EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:HIGH TEMPERATURES MAY CAUSE PRESSURE
BUILD UP IN CLOSED CONTAINERS.
Accidental Release
Spill Release Procedures:REMOVE ALL IGNITION SOURCES. SCOOP INTO
CONTAINERSCLEAN UP RESIDUE WITH 1,1,1-TRICHLOROETHANE.
Exposure Controls
Ventilation:GENERAL VENTILATION TO MAINTAIN VAPOR BELOW TLV.
Protective Gloves:SOLVENT RESISTANT GLOVES
Eye Protection:CHEMICAL GOGGLES OR FULL FACE SHIELD
Supplemental Safety and Health
KEY1:F3.
Chemical Properties
HCC:F3
Spec Gravity:1.18
Solubility in Water:MODERATE
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:OXIDES OF CARBON
Disposal
Waste Disposal Methods:EPA WASTE NO. D-001. DISPOSE OF SPILLAGE IN
COMP- LIANCE WITH FEDERAL AND STATE REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.